- 5pcs Digital Counter Remote Master Remote Controller Welcome to check contact skype: victoria81518 or email: info@buyonme.net.
- PC1500/1550 - User Manual - Portuguese - ClassicSeries 6 Zone Alarm Control Panel PC1550 PC1500/PC1550 - Installation Manual - French - ClassicSeries 6 Zone Alarm Control Panel.
- Code Description; 1019: BasisLEDLight Instructions: Download: 1110: 7500EDF Digital Electronic Flash - Olympus: Download: 1117: 7400EDF Digital Electronic Flash - Olympus.
How to Correctly Use Digital Counter Remote Master?
Click on the links below to download technical manuals for digital panel meters, counters, timers and remote displays by Laurel Electronics. Call (714) 434 6131 for Product Assistance Panel Meters - Counters - Timers - Transmitters, 4-20 mA & Modbus - Ethernet - USB - RS485 - RS232. /road-rash-download-for-mac.html.
Digital Counter Remote Master have english and chinese language. Digital Counter Remote Master Work with remote Control Key A B C Styles. Some customers feedback that they don't know how to correctly operate digital counter remote master, so ADK auto diagnostic factory share with you the Digital Counter Remote Master User Manual.
Digital Counter Remote Master Digital Counter Car Codes
Digital Counter Remote Master Language switch: Chinese to English
turn on power button and press'5' button two times, it shows '1 遥控器复制';
Press '3' button four time, it shows' 5 系统设定'
Press '5' button one time, it shows' 1 语言设定'
Press'5' button one time, it shows' 2 chinese'
Press' 3' button one time, you will see ' 1 english'
Press'5' button one time, it displays' 1 set language'
turn off power and then turn on to finish english language setting.
Digital Counter Remote Master User Manual:
The remote master is used to copy RC, working with remote control A, B, C three styles submachines.
1. Four copy styles as below
Turn on the power, press key5 2 times, interface shows 'remot copy';
1) press key5 one time, shows '1.normal copy';
Digital Counter Remote Master Digital Counter Car Codes
Digital Counter Remote Master Language switch: Chinese to English
turn on power button and press'5' button two times, it shows '1 遥控器复制';
Press '3' button four time, it shows' 5 系统设定'
Press '5' button one time, it shows' 1 语言设定'
Press'5' button one time, it shows' 2 chinese'
Press' 3' button one time, you will see ' 1 english'
Press'5' button one time, it displays' 1 set language'
turn off power and then turn on to finish english language setting.
Digital Counter Remote Master User Manual:
The remote master is used to copy RC, working with remote control A, B, C three styles submachines.
1. Four copy styles as below
Turn on the power, press key5 2 times, interface shows 'remot copy';
1) press key5 one time, shows '1.normal copy';
2) then press key3 one time, shows '2.Singkey copy';
3) continue to press key3 one time, shows '3.MulFreq copy';
4) repeat last step, shows '4.same SYS copy';
2. 'Normal Copy'
When the interface shows '1.normal copy', then action as below
1) press key5 one time, shows 'input 1key to', then press the original remote 1key one time, the machine sounds 'bee' a time,
enter into code reading; then press key5 one time, shows 'input 2key to', continue last step.
Action as this to read all keys one by one;
2) When finished original remote code reading, press key5 two times, shows 'input No.1 remote', means insert RC
(remote control) A, press key5 one time, then write the code infomation into new remote;
3) adjust frequency: back to interface 'remot copy', press key4 one time to test frequency: put the original
remote on the machine and press any key one time, shows the frequency. Then put the RC A on the machine,
press key1 one time, use the non-inductive regulator action on the white capacitance to adjust frequency fit.
4) after adjust frequency, press key1 & key 2 at the same time (if the remote has 5keys, just need press
key5 one time), the light flash one time. When you press any key there is the light, means copy successfully finished.
3. Other copy method, please action as the indication in the machine.
A Brief Duplicator User's Guide
A. NORMAL COPY
1.please sturn on the power and press the 5th key once------remote copy
2. 'Normal Copy'
When the interface shows '1.normal copy', then action as below
1) press key5 one time, shows 'input 1key to', then press the original remote 1key one time, the machine sounds 'bee' a time,
enter into code reading; then press key5 one time, shows 'input 2key to', continue last step.
Action as this to read all keys one by one;
2) When finished original remote code reading, press key5 two times, shows 'input No.1 remote', means insert RC
(remote control) A, press key5 one time, then write the code infomation into new remote;
3) adjust frequency: back to interface 'remot copy', press key4 one time to test frequency: put the original
remote on the machine and press any key one time, shows the frequency. Then put the RC A on the machine,
press key1 one time, use the non-inductive regulator action on the white capacitance to adjust frequency fit.
4) after adjust frequency, press key1 & key 2 at the same time (if the remote has 5keys, just need press
key5 one time), the light flash one time. When you press any key there is the light, means copy successfully finished.
3. Other copy method, please action as the indication in the machine.
A Brief Duplicator User's Guide
A. NORMAL COPY
1.please sturn on the power and press the 5th key once------remote copy
3.begin to input the client's 1st key(press the key until the frequency displayed )------- ISN data
5.input the client's1st key again--------ISN data
6.press the 5th key once------input 2 key
6.press the 5th key once------input 2 key
8.press the 5th key once--------input 3 key
10.The rest deduced, having finished the inputing process, press the 5th key twicees -----use
NO.'x' remote
11.having inserted No.'x' remote, press the 5th key twice------write ok
NO.'x' remote
11.having inserted No.'x' remote, press the 5th key twice------write ok
12.pull out the remote, press the duplicator 4th key---------FREQ MHz
13.put the copied remote on the duplicator, press any key once-----appearing frequency
14.put the new remote on the duplicator, use ceramic aligner tool to turn round
white capacitance until the digtal reach the copied remote
15.having finished the adjustment, press the 1st and 2rd once at the same time .
white capacitance until the digtal reach the copied remote
15.having finished the adjustment, press the 1st and 2rd once at the same time .
Digital Counter Remote Master User Manuals
the light flash once, then press any key, the light -light-, over
B. SINGKEY single COPY
1.turn on the power, press the 5th key twice-----normal copy
B. SINGKEY single COPY
1.turn on the power, press the 5th key twice-----normal copy
3.press the 5th once------input 1 key
5.input the 1st key the 2nd time ------input 1key 013
6.input the 1st key the 3rd time-------input 1key 023
8.input the 2nd key once-----input 2key 023
9.all key inputted, press the duplicator 5th key twice-----use no'x'remote
10.the other steps like the 'normal copy' C. Reread/recopy(SCP)
C. this function is used to recopy the having copied remote
1.turn on the power, press the 5th key once ------remote copy
C. this function is used to recopy the having copied remote
1.turn on the power, press the 5th key once ------remote copy
3.insert the client's having copied remote, press the 5th key once-----write to remot
4.pull out the client's remote, press the 5th key once------input NO.'X' remote
5.insert the new blank No'x' remote, press the 5th key twice-----write ok
6.pull out the new remote, begin to adjust the frequency, like the 'normal copy'
Digital Counter Remote Master User Manual User
7.press the 1st and 2nd key of the new remote at the same time, then press
any key
any key
the light light, ok, over.
D. No.3 remote copy(rolling code series)
1. turn on the power, input all key of the client's remote,like the 'normal copy'
D. No.3 remote copy(rolling code series)
1. turn on the power, input all key of the client's remote,like the 'normal copy'
2. Notice: some of the client's remotes are two key, even one key, you must input five key(any key is ok)
3. after you finish inputing, press the 5th key twice, the duplicator begin to scan, if the decode scaning is succcessful--------
-completely copy; if failed, the scaning can't be stopped, or the duplicator
-completely copy; if failed, the scaning can't be stopped, or the duplicator
Digital Counter Remote Master User Manual Pdf
4. if display(completely copy), press the 5th key twice-----input No.3 remote
Digital Counter Remote Master Manual
5. insert the new blank remote(No.3), press the 4th key(+1), then press the 5th key ------write ok
6.pull out the new copiedremote, begin to adjust the frequency, like the 'normal copy'
7.if the new coplied remote is 5 keyes, please press it's 5th key; if the remote 5 keyes, press the 1st and 2nd
key once at the same time, then press any key, the light
lights. end
Notice: Please intercopy with the client's old remote, or it can't be used
6.pull out the new copiedremote, begin to adjust the frequency, like the 'normal copy'
7.if the new coplied remote is 5 keyes, please press it's 5th key; if the remote 5 keyes, press the 1st and 2nd
key once at the same time, then press any key, the light
lights. end
Notice: Please intercopy with the client's old remote, or it can't be used
merc1ful.netlify.app – 2018